United Imaging uCT Voltage Stabilizer Solution | 100kVA Voltage Stabilizer Application Case
What capacity voltage stabilizer does a United Imaging CT need? This case presents the actual application of a 100kVA Winzele voltage stabilizer (100kVA voltage stabilizer) configured for a United Imaging CT at a medical imaging facility in China; 100kVA was the actual installed configuration for this project.
United Imaging is a domestic (Chinese) medical imaging equipment brand. Like imported CT equipment, domestic CT equipment has explicit requirements for the power environment during scanning and imaging; the voltage stabilizer acts as the voltage regulation stage in the power circuit, providing regulated power to the connected CT. This case illustrates that stabilization solutions are matched according to equipment documentation and on-site electrical conditions, without distinction between domestic and international brands (United Imaging CT voltage stabilizer).
Two on-site photos show the installation environment of the United Imaging CT equipment with the 100kVA Winzele voltage stabilizer.
Why the United Imaging CT Needs a Dedicated Voltage Stabilizer
The United Imaging CT is precision medical imaging equipment, with a system comprising control, scanning and data processing electronic units. Regardless of brand, a CT has explicit requirements for the power environment during scanning and imaging: the supply voltage, phase configuration and frequency must match the equipment nameplate and on-site distribution conditions.
Common power supply issues at hospital sites include: grid voltage fluctuation, long-distance line voltage drop, load changes within the medical facility and regional grid condition differences. Once these factors exceed the equipment’s allowable range, they may affect CT system operational stability and increase the risk of abnormal equipment shutdown.
The role of a voltage stabilizer is to regulate the fluctuating input voltage to within the equipment’s allowable range, providing a stable power environment for the CT.
Case: United Imaging CT with Winzele Voltage Stabilizer
Case Overview
Winzele configured a 100kVA stabilization unit for the United Imaging CT system at a medical imaging facility in China. The stabilizer is installed in the CT equipment power circuit as the voltage regulation stage, providing regulated, stable power to the equipment.
Equipment Information
The equipment brand in this case is United Imaging, and the equipment type is a CT Scanner. The specific uCT model was not recorded in the project information and is referred to as “United Imaging CT” in this article; the selection is based on the confirmed equipment brand, CT type, project capacity and site conditions.
Different United Imaging CT models may have different input requirements and load characteristics, so the stabilization solution needs item-by-item verification. Winzele matches stabilization solutions for both domestic and international brand medical imaging systems according to equipment documentation and on-site electrical conditions.
Stabilizer Configuration
| Installed Equipment | 100kVA Winzele Voltage Stabilizer |
|---|---|
| Application | United Imaging CT Medical Imaging System |
| Configuration Item | Details |
|---|---|
| Installed Equipment | 100kVA Winzele Voltage Stabilizer |
| Application | United Imaging CT Medical Imaging System |
| Function | Voltage regulation stage in the CT power supply circuit |
This project used a 100kVA Winzele voltage stabilizer on site for voltage regulation in the United Imaging CT power environment. This 100kVA voltage stabilizer is the actual installed configuration for this project and represents the application of Winzele stabilization equipment in a domestic medical imaging equipment power project.
100kVA is the actual configuration for this project and does not mean all United Imaging CT equipment uses the same capacity. Other projects must still determine capacity based on the equipment model, input requirements, load characteristics and on-site electrical conditions.
Installation Photos
Fig. 1: On-site application of United Imaging CT with 100kVA Winzele voltage stabilizer
Fig. 2: Installation environment of United Imaging CT medical imaging equipment with Winzele voltage stabilizer
Capacity Notes: 100kVA Installed Capacity
100kVA is the actual installed configuration for this project and does not mean all United Imaging CT equipment uses the same capacity. The capacity of a CT scanner voltage stabilizer (CT scanner voltage stabilizer) cannot be determined solely from the equipment brand or number of slices; it must be confirmed together with the equipment model, input requirements, peak load and on-site electrical conditions.
Stabilization Adaptation for Domestic and International Brand CT
Application Experience with Domestic Medical Imaging Equipment
Winzele not only serves international medical imaging equipment from Siemens, GE, Philips and others, but also supports the power stabilization needs of domestic medical imaging equipment. Solutions for equipment of different brands must all be designed according to the equipment documentation and on-site power supply conditions.
| Brand | Equipment Type | Case |
|---|---|---|
| United Imaging (domestic) | CT | This case |
| Siemens | CT | Siemens CT case |
| GE | CT | GE CT case |
| Philips | CT | Philips CT case |
| GE | Dual-slice CT | GE dual-slice CT case |
Domestic and international brand equipment share commonalities in power supply requirements but also differ by model: stabilization solutions are always based on equipment documentation and on-site electrical conditions, and the verification steps are not skipped because of brand differences. For MRI, DR and other medical equipment cases, see Medical Equipment Cases.
Project Configuration Summary
| Item | Details |
|---|---|
| Equipment Brand | United Imaging |
| Equipment Model | Not recorded (uCT series) |
| Equipment Type | CT Scanner |
| Installed Equipment | 100kVA Winzele Voltage Stabilizer |
| Manufacturer | Winzele |
| Application Site | Medical Imaging Facility, China |
| Supporting Evidence | 2 on-site photos |
Voltage Differences in Overseas Projects
This case is located in China. Overseas United Imaging CT projects should redesign the stabilization range and any necessary voltage conversion scheme based on the specific model, rated input voltage, frequency and on-site electrical conditions; this project’s configuration cannot be copied directly. This verification is a necessary step in overseas medical imaging power solutions (medical imaging power solution).
Frequently Asked Questions
Does a United Imaging CT (domestic CT) also need a voltage stabilizer?
Yes. The impact of the power environment on a CT is independent of brand: grid voltage fluctuation, line voltage drop and load changes affect domestic CT equipment just the same. Winzele’s stabilization solutions are matched according to equipment documentation and on-site electrical conditions, without distinguishing domestic from international brands.
What capacity voltage stabilizer does a United Imaging CT use?
In this case, the United Imaging CT was configured with a 100kVA voltage stabilizer, which is the actual installed configuration for this project. Capacity cannot be determined solely from the equipment brand or number of slices; it must be evaluated together with the specific model, input requirements, peak load and on-site electrical conditions.
Related Medical Equipment Cases
- GE CT Voltage Stabilizer Application Cases
- Siemens CT Voltage Stabilizer Application Cases
- Philips CT Voltage Stabilizer Application Cases
- Siemens MRI Voltage Stabilizer Application
- Canon DR Voltage Stabilizer Application
For more medical equipment cases such as MRI and DR, see Medical Equipment Cases
Related Solutions
Consult Winzele for a Medical Equipment Voltage Stabilization Solution
To configure a medical equipment voltage stabilizer (medical equipment voltage stabilizer) for a United Imaging CT or other medical imaging equipment, please provide the CT brand and model, equipment input requirements and site voltage conditions; if isolation, voltage conversion, fast response or bypass is involved, please also indicate this.
For capacity selection, see: How to Choose CT Equipment Stabilizer Capacity: 100kVA, 150kVA or 200kVA.
The Winzele engineering team will provide a matched solution based on the project conditions.
