Tsarin Wutar Lantarki na Likita (MIPS) / Tsarin IT na Likita
Rated capacity:3.15/4/5/6.3/8/10KVA
Input AC voltage :
1 phase 220V/230V(AC)（≤10KW）
Input Frequency: 50/60Hz±10%
Output AC voltage :
1 phase 220V/230V(AC)（≤10KW）
- Gabatarwar Samfuri
- Sigogin Fasaha
- Bayanan Samfuri
Gabatarwar Samfur
Wurare masu mahimmanci a fannin likitanci, kamar dakunan tiyata, ICUs, da CCUs, galibi ana samun wutar lantarki ta hanyar “tsarin samar da wutar lantarki marar ƙasa” (watau “tsarin IT” ko “tsarin samar da wutar lantarki na likitanci”). Yin amfani da wutar lantarki a waɗannan wurare ta hanyar transfoma mai warewa mai ƙarfin 3KVA-10KVA na kashi ɗaya yana hana ruwan wutar lantarki daga sauran hanyoyin samar da wutar shiga cikin na’urorin lantarki na likitanci a cikin dakin tiyata, ICU, da CCU ta hanyar wayar ƙasa, wanda ke haifar da haɗari ga lafiyar marasa lafiya; baya ga haka, idan nauyin da aka haɗa da wutar lantarki mai warewa (kamar na’urorin lantarki na likitanci daban-daban) ya sami matsala ta ƙasa, ba zai iya yin zagaye da ƙasa ba, kuma zai iya haifar da ƙaramin ruwan wutar lantarki mai ƙarfi, wanda ke kare marasa lafiya daga lahani na ruwan wutar lantarki.
Tsarin Tsarin
Babban Sassan Tsarin IT na Likitanci
Tsarin Samar da Wutar Lantarki Mai Warewa (IPS) yawanci yana ƙunshe da manyan abubuwa huɗu
a) Transfoma Mai Warewa na Likitanci
b) Tsarin Rarraba IT tare da MCB da yawa (yawanci 12)
c) Na’urar Kula da Ragewar Ragewa
d) Tsarin Ƙararrawa Mai Nisa
Transfoma Mai Warewa na Likitanci
Transfoma Mai Warewa sune manyan na’urori na Tsarin Samar da Wutar Lantarki Mai Warewa. Tare da taimakon transfoma mai warewa, dakin da ake samar da wutar yana warewa daga tsarin da aka ƙasa. Sakamakon haka, ruwan wutar lantarki a cikin dakin yana raguwa daga matakan mA zuwa matakan µA. Baya ga haka, idan akwai gajeren zagaye na farko tsakanin Lantarki da Ƙasa, ba za a sami duhu ba.
Ya dace da IEC 61558-2, amincin transfoma na wutar lantarki, na’urorin samar da wutar lantarki
Sashi na 2-15: Bukatu na musamman ga transfoma masu warewa don samar da wutar lantarki a wuraren likitanci:
- Ƙarfin gajeren zagaye ≤ 3%
- Ruwan shigar da ba a ɗauka ba ≤ 3%
- Ruwan shigar da ke tashi ≤ 12 x ruwan shigar da aka ƙididdige
Na’urar Kula da Ragewar Ragewa
An ƙera ta don ci gaba da kula da juriyar ragewar hanyar sadarwar lantarki da ba a ƙasa ba kuma ta gano ta atomatik idan akwai wani matsala tsakanin tsaka-tsaki da ƙasa. Idan akwai matsala ta ƙasa, mai sarrafawa zai gano ta atomatik wane zagaye na tsarin samar da wutar lantarki mai warewa ya ƙunshi matsala, sannan ya nuna wa mai amfani ta hanyar ƙararrawa, wanne daga cikin maɓallan wutar a cikin yankin mahimmanci na asibiti, kamar dakin tiyata, yana da matsala. Wannan na iya faruwa saboda waya mara kyau, maɓallin wutar, ko na’urar da aka toshe a cikin maɓallin wutar.
Shigar da ƙarfin lantarki na AC mai ƙarancin mita tsakanin hanyar sadarwa da ƙasa. Auna ragewar ta hanyar ruwan wutar lantarki na ƙasa a cikin IMD.
– Lokacin amsawa <1s
– Juriya na ciki 110Khz
– Nuni
– Juriya na ragewa mai gamsarwa (Hasken Kore).
– Ragewar juriya na ragewa ƙasa da
matakin matsala (Hasken Orange).
– Gudanar da transfoma:
– Nuna Ruwan Wutar Lantarki na Biyu na Transfoma
– Ƙararrawa na wuce gona da iri
– Ƙararrawa na zafi mai yawa
Sami Farashi Cikin Sauri
Tuntuɓi ƙungiyar tallace-tallacenmu don farashi, bayanan fasaha da bayanin isarwa.
