Mai daidaita wutar lantarki na SVC Servo Motor
Rated Power: 0.5~200KVA
Input Voltage: Customizable
Input Frequency: 50/60Hz±10%
Output Voltage: 220/380V
MOQ: 1 Set/Piece
Brand: WINZPOWER
- Gabatarwar Samfuri
- Sigogin Fasaha
- Bayanan Samfuri
Gabatarwar Samfur
SVC(TNS) mai daidaita wutar lantarki ta AC mai girman matsayi uku, wanda ya haɗa da 3 masu daidaita wutar lantarki guda ɗaya masu aiki sosai. Wutar shigar da grid ita ce tsarin waya huɗu na matsayi uku, kuma wutar fitarwa ita ma tsarin waya huɗu na matsayi uku ne. An sanye shi da mitoci uku don nuna matsayin uku daban-daban, kuma an sanye shi da maɓallin canzawa da voltmeter don canzawa da auna kowane matsayi. Mai daidaita wutar lantarki yana da fa’idodi kamar ƙaramin girma, nauyi mara nauyi, babu gurbataccen siffar igiyar ruwa, inganci mai girma, aiki mai dogaro, jinkiri, da wutar lantarki mai yawa, da sauransu. Wannan jerin masu daidaita wutar lantarki suna da tuki gama gari, kuma su ne ainihin wutar lantarki da aka daidaita. Ana iya amfani da su sosai a kowane wuri da ake buƙatar wutar lantarki don tabbatar da aikin kayan aikin ku na lantarki yadda ya kamata.
Idan aka kwatanta da sauran nau’ikan masu daidaita wutar lantarki, farashin jerin TNS na masu daidaita wutar lantarki ya ragu sosai. Yana amfani da transformer mai zagaye a matsayin babban na’urar daidaita wutar lantarki. Saboda tsarin ringin maganadisu ne, hanyar maganadisu ta rufe gaba ɗaya kuma babu zubar da maganadisu, don haka aikin maganadisu ya fi kyau kuma yana ƙara ceton makamashi.
Tsarin lantarki na haɗin matsayi uku guda ɗaya yana da kyakkyawan hana rashin daidaiton matsayi uku na wutar lantarki.
Ka’idar Aiki
Lokacin da wutar grid ta canza ko kuma nauyin ya bambanta, da’irar sarrafa samfurin atomatik za ta aika da sigina don tuka motar servo wanda zai iya daidaita matsayin goga na mai daidaita wutar lantarki, sannan, za a daidaita wutar fitarwa zuwa ƙimar da aka ƙayyade kuma ta sami kwanciyar hankali.
Ka’idar Daidaita Wutar Lantarki
Haɗin farko na mai sarrafa wutar lantarki TVV yana cikin siffar Y da aka haɗa zuwa ƙarshen fitarwa na mai daidaita wutar lantarki kuma yana haɗuwa da haɗin farko na transformer mai ramawa TBa, amma haɗin na biyu na transformer mai ramawa TBa an haɗa shi a jere a cikin babban da’irar, Ana ɗaukar matsayin A a matsayin misali don nuna ka’idar aikin daidaita wutar lantarki kamar yadda aka nuna a hoto na 1. Idan an yi watsi da raguwar wutar lantarki na impedance na transformer mai ramawa, ana iya gani daga hoton da ke sama:
Uao = Uai + UBa Ka’idar ita ce: lokacin da wutar shigar Uai na matsayin A ta ƙaru △Uai, wutar ramawa Uba ta canza daidai △Uba kuma lokacin da △Uai ya yi daidai da -△Uba, wutar fitarwa Uao na matsayin A ba ta canzawa, kuma matsayin B da matsayin C suna daidai da matsayin A.
Tsarin daidaita wutar lantarki shine: dangane da canjin wutar fitarwa, sashin auna wutar lantarki yana samun samfurin irin wannan canjin, yana auna shi kuma yana fitar da sigina don sarrafa aikin SM na motar servo, ta hanyar mai rage gudu da sarkar, don sa goga ya zame ko ya birgima a kan mai daidaita wutar lantarki TVV don daidaita wutar na biyu na TVV don canza polarity da girman wutar ramawa kuma tabbatar da cewa wutar fitarwa ta daidaita kai tsaye a cikin iyakar da aka ƙayyade na daidaiton daidaita wutar lantarki, don haka samun daidaita wutar lantarki ta atomatik.
Wutar Shigar da Ƙarfin Fitarwa
Dangantaka tsakanin ƙarfin fitarwa da wutar shigar ana nuna shi a hoto na 1. Lokacin da wutar shigar na mai daidaita matsayi ɗaya ta yi ƙasa da 198V, wutar shigar na mai daidaita matsayi uku ta yi ƙasa da 342V ko kuma wutar matsayi ta yi ƙasa da 198V, ƙarfin fitarwa na samfurin zai ragu, kuma dole ne a rage ƙarfin.
Vi Wutar Shigar (V)
P2 Ƙarfin Fitarwa (VA)
P Ƙarfin Fitarwa na Ƙayyadaddun (VA)
Jerin SVC(TNS) AVR Sigogin Fasaha
| Sigogin Fasaha na Shigar |
||
| Abu | Alamomin Fasaha | Bayanin |
| Wutar Shigar da aka Ƙayyade (Vac) | Matsayi Uku 200V/208V/220V/380V/400V/440V/480V (Ana iya keɓance kowane wutar lantarki) Matsayi ɗaya 110V/220V/230V/380V (Ana iya keɓance kowane wutar lantarki) | Matsayi uku waya uku (L1, L2, L3) +N+ Ƙasa (PE). Matsayi ɗaya layi biyu (L, N) + Ƙasa (PE). Tsarin na iya amfani da layin tsaka tsaki ko a’a. Ana iya keɓance kowane hanyar shigar layi |
| Kewayon Wutar Shigar (%) | (Wutar da aka Ƙayyade)±20%. Misali 380V±20% (Ana iya keɓance sauran kewayon shigar wutar lantarki) | Gabaɗaya, kewayon wutar shigar na iya zama ±15%/20%/30%/40% na wutar da aka ƙayyade. |
| Mitar Shigar (Hz) | Tsoho 40~79Hz | Ana iya keɓance sauran mitoci |
| Inganci | 98% | |
| Transformer keɓewar fitarwa | △/Y ko Y/Y | Zaɓaɓɓe |
| Sigogin Fasaha na Fitarwa | ||
| Yanayin Daidaita Wutar Lantarki | Transformer daidaitawa na Thyristor | |
| Wutar Fitarwa (Vac) | Matsayi uku 380V/400V (±10% ana iya daidaitawa) Matsayi ɗaya 220V/230V (±10% ana iya daidaitawa) |
Hakanan ana iya keɓance sauran wutar lantarki, misali: Matsayi uku 200V/220/440V/480V ko wasu. |
| Kwanciyar wutar fitarwa (daidaiton matsakaici) | ±1-5% (2-5% don samfuran yau da kullun) | |
| Lokacin Amsa Mai Sauri | 100ms (Dangane da wutar shigar AC) | |
| Ƙaruwar THD na Fitarwa | ＜0.1% (tsaye da motsi) | Babu ƙarin gurbataccen siffar igiyar ruwa (tsaye da motsi) da aka samar. Ƙaruwar THD na wutar lantarki bai wuce 0.1% ba |
| Mitar Fitarwa | Daidai da mitar shigar | |
| Rashin daidaiton matsayi uku | Sarrafa daidaiton wutar matsayi uku ta atomatik (Ee) | |
| Nau’in nauyin da ya dace | Kowane nau’in nauyi (mai juriya, mai motsawa, mai ƙarfin ajiya) | |
| Aikin Bypass | ||
| Sigogin Mai Sarrafa | ||
| Yanayin Sarrafa | Sarrafa dijital cikakke | Ana amfani da ɓangaren analog don daidaita siginar shigar da fitarwa |
| Babban sashin sarrafa | Babban guntu yana amfani da STM32F4XX don sarrafawa da aunawa | Wasu samfura suna amfani da babban sarrafa ARM tare da aikin DSP |
| Dabarun Sarrafa | Kwatanta & PID | |
| Yanayin Tukin Mota | Mota DC ta hanyar direban mosfet (Kariyar freewheeling diode) | |
| Lokacin Daidaitawa | Matsakaicin wutar shigar dangane da canjin kewayon 10%, lokacin daidaitawa bai wuce daƙiƙa 1.5 ba | |
| Hanyoyin auna wutar lantarki da halin yanzu | Samfurin RMS na gaskiya (aiki tare da matsayi uku) | Samfurin RMS & FFT maki 256 |
| Dabarun Sarrafa Wutar Lantarki & Halin Yanzu | Sarrafa rufaffiyar madauki na PID na wutar lantarki | |
| Hanyar sadarwa | RS485/232/MODBUS-RTU Protocol | Zaɓaɓɓe TCP/IP, GPRS da sauran hanyoyin sadarwa |
| Sigogin Nuni | ||
| Kafofin Nuni | Lambar yanki na LCD mai ayyuka da yawa | Hakanan ana iya keɓance allon taɓawa na masana’antu (7″ ko 10″) |
| Nuna sigogin lantarki |
Wutar shigar matsayi uku da mita; Wutar fitarwa matsayi uku da mita; Matsakaicin wutar fitarwa; Factor na wutar fitarwa; Halin yanzu na fitarwa matsayi uku; Ƙarfin aiki na fitarwa da ƙarfin bayyananne; |
|
| Nuna bayanan faɗakarwa | Wutar shigar da yawa (OV), halin yanzu da yawa (OC); wutar shigar da ƙasa (UV); Rashin aikin fuse; Nauyi da yawa; Laifin jerin matsayi; da sauran bayanan laifi | |
| Daidaiton nuni | Daidaiton shine Class 0.5s | |
| Ƙudurin nuni na wutar lantarki | 0.1V | |
| Ƙudurin nuni na halin yanzu | 0.1A | |
| Kariya | ||
| Jerin Kariya | Wutar shigar da yawa (OV), halin yanzu da yawa (OC); wutar shigar da ƙasa (UV); Rashin aikin IGBT; zafi mai yawa na heat sink; zafi mai yawa na transformer; da gajeren kewayawa. | |
| Aikin Kariya | Yanke fitarwa da faɗakarwa; Bypass ta atomatik; Fara ta atomatik bayan dawo da laifi | Ana iya saita lambobin sadarwa na laifi (NC&NO) |
| Yanayi | ||
| Zazzabi na Aiki (℃) | -25℃+45℃ | Yanayin zazzabi mai tsanani yana buƙatar keɓancewa na musamman ko rage ƙarfin |
| Danshi Mai Dangantaka (RH) | 10%-90% (20℃±5℃) | |
| Tsayi | ＜2000m | Ga kowane ƙaruwar tsayi na 1000m, dole ne a rage ƙarfin da 10%. |
| Matsayin IP | IP20 | Ana iya keɓance sauran Matsayin IP kamar IP33 na waje |
| Matsayin Hayaniya (dB) | ＜55dB | |
| Sauran buƙatun musamman ana iya sadarwa da winzele | ||
Jerin Samfuran AVR(TNS) AVR
1. Jerin Samfuran Matsayi Uku (Wutar shigar da aka ƙayyade na iya zama Matsayi Uku 200V/220V/380V/440V/480V da sauransu)
| Nau’in |
Ƙarfi (kVA) |
Halin Yanzu (A) |
Girma W×D×H(mm) |
| TNS-1.5KVA | 1.5KVA | 1.85A | 490×350×170 |
| TNS-3KVA | 3KVA | 3.7A | 490×350×170 |
| TNS-4.5KVA | 4.5KVA | 6.84A | 490×350×170 |
| TNS-6KVA | 6KVA | 9.1A | 320×320×680 |
| TNS-9KVA | 9KVA | 13.7A | 360×380×730 |
| TNS-15KVA | 15KVA | 22.5A | 360×380×730 |
| TNS-20KVA | 20KVA | 30.4A | 430×500×840 |
| TNS-30KVA | 30KVA | 45.6A | 430×500×840 |
| TNS-50KVA | 50KVA | 76A | 610×540×1050 |
| TNS-60KVA | 60KVA | 91.2A | 610×540×1050 |
| TNS-80KVA | 80KVA | 122A | 650×580×1150 |
| TNS-100KVA | 100KVA | 152A | 650×580×1150 |
| TNS-120KVA | 120KVA | 182A | 700×650×1350 |
2. Jerin Samfuran Matsayi ɗaya (Wutar shigar da aka ƙayyade na iya zama Matsayi ɗaya 110V/220V/380V/440V/480V)
| Nau’in |
Ƙarfi (kVA) |
Halin Yanzu (A) |
Girma W×D×H(mm) |
| TND-0.5KVA | 0.5KVA | 2.3A | 190×180×150 |
| TND-1KVA | 1KVA | 4.5A | 220×220×160 |
| TND-1.5KVA | 1.5KVA | 6.8A | 220×220×160 |
| TND-2KVA | 2KVA | 9.1A | 240×270×210 |
| TND-3KVA | 3KVA | 13.63A | 240×300×230 |
| TND-5KVA | 5KVA | 22.7A | 220×306×280 |
| TND-7KVA | 7KVA | 31.8A | 250×410×360 |
| TND-10KVA | 10KVA | 45.5A | 320×350×570 |
| TND-15KVA | 15KVA | 68.2A | 350×390×660 |
| TND-20KVA | 20KVA | 91A | 350×390×660 |
| TND-30KVA | 30KVA | 136A | 500×500×960 |
| TND-40KVA | 40KVA | 182A | 550×550×1060 |
| TND-50KVA | 50KVA | 227A | 600×500×1060 |
Aikace-aikace
Ana iya amfani da samfuran sosai a cikin kayan ofis, kayan gwaji, kayan aikin likita, kayan aikin masana’antu ta atomatik, kayan gida, tsarin haske, tsarin sadarwa, gidajen yanar gizo, da sauransu.
Misalai da Gallery
AVR matsayi uku na waje TNS-50KVA
AVR Matsayi ɗaya TND-1000VA
AVR Matsayi ɗaya TND-30000VA 
AVR matsayi uku na waje TNS-80KVA (Nuni LCD tare da aikin module GPRS)
AVR matsayi ɗaya/uku na waje TNS-80KVA&TND-30KVA (Nuni LCD tare da aikin module GPRS)
Mai daidaita wutar lantarki ta atomatik TNS-80KVA
Mai daidaita wutar lantarki ta atomatik na matsayi uku
Mai daidaita wutar lantarki ta atomatik na matsayi uku TNS-60KVA
Mai daidaita wutar lantarki ta atomatik na matsayi ɗaya TND-40KVA
Sami Farashi Cikin Sauri
Tuntuɓi ƙungiyar tallace-tallacenmu don farashi, bayanan fasaha da bayanin isarwa.
